Masonry repair
Caps & crownsLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Largo
Chimney repair in Largo usually comes down to one thing: corrosion from salt air. If you live in Keene Park, Lakeview, or anywhere along the Gulf side of Pinellas County, your chimney is fighting a losing battle against humidity and brackish wind, and the first casualty is almost always the metal. We’re Hadley Chimney Tampa, founded in 2003, and we’ve spent two decades fixing exactly what Largo’s climate breaks. Whether it’s a rusted-out chimney cap on a 1960s ranch or water stains spreading across your ceiling from failed flashing, we give you a written price before any work starts, plus photos proving the repair was done right. Call (850) 790-3475 and a live person answers, day or night.

Why Hadley Chimney Tampa Is Largo’s Preferred Chimney Repair Company
We answer the phone. That sounds small, but when you’re staring at a water stain above your fireplace and wondering if you need a new liner or just a flashing patch, getting a real human on the line matters. Every Largo call goes to a live person, 24/7, no answering service runaround.
Our technicians arrive in a tracked window, not a four-hour guess. You’ll know who’s coming, when they’ll be there, and you’ll see the problem before we fix it. Cory Mitchell leads our crews, and the standard he set is simple: if we can’t show you a photo of the damage and explain it in plain words, we haven’t earned the job. That’s the Relay Visibility Guarantee, and it applies to every repair we make in Largo, from small flashing patches to full chimney rebuilding.
Since 2003, we’ve worked on thousands of Pinellas County chimneys, and Largo’s older housing stock keeps us particularly busy. Homes built in the 1950s, 60s, and 70s, the ones with original masonry chimneys and galvanized caps, are our bread and butter here. We know what fails first, and we tell you honestly when a repair can wait and when it can’t.
Styles & brands we work with


Chimney Liner Installation in Largo
Chimney Liner Installation in Largo is often about making a gas appliance vent safely, not about wood fires. Many Largo homes use their chimneys exclusively to vent gas water heaters or furnaces, and those flues still need intact liners. A cracked or corroded liner can leak carbon monoxide into the house, and in Largo’s humid air, clay tile liners deteriorate faster than you’d expect. We install stainless steel and DuraFlex flexible liner systems sized to your existing flue, and a typical liner installation in Largo runs $1,800 to $3,400 depending on height, diameter, and access.
Signs Your Largo Chimney Liner Is Failing
You might see flaking clay tile pieces in the firebox, rust stains on the damper, or smell a stale, ashy odor even when the fireplace hasn’t been used in months. Gas appliance venting often shows a different warning: moisture streaks on the chimney exterior or a water heater that struggles to draft properly. If you’re seeing any of these, call us at (850) 790-3475 for a camera inspection and a straight answer.
Gas Appliance Flue Sizing in Largo
Largo’s older ranch homes were often built with flues sized for wood fireplaces, then retrofitted for gas appliances decades later. An oversized flue causes condensation, which accelerates liner corrosion, which is why so many 60s-era chimneys in Keene Park need liner replacement by now. We measure, show you the camera footage, and give you a written quote before we touch anything.
Chimney Flashing Repair in Largo
Chimney Flashing Repair in Largo usually begins with a ceiling stain. Flashing is the metal strip where your chimney meets the roofline, and when it fails, water follows the masonry down into your attic, drywall, and framing. Largo’s afternoon thunderstorms hammer flashing relentlessly, and salt air corrodes standard galvanized flashing within a decade. Repairing flashing in Largo typically runs $450 to $900 for minor resealing and patch work, while full flashing replacement with stainless steel runs $1,200 to $2,000.
Rust, Caulk, and What We Actually Fix
We don’t caulk over rust and call it done. When flashing fails in Largo, we remove the corroded section, inspect the underlying roof deck for water damage, and install new flashing that’s matched to your chimney material. On older masonry chimneys, we may recommend step flashing embedded into the mortar joints, which seals better than surface-mounted flashing in our storm-heavy climate.

When a Flashing Leak Needs a Bigger Fix
Sometimes what looks like a flashing failure is actually a chimney crown problem above it. Water runs down the crown, across the masonry, and slips behind the flashing, making the flashing look guilty when it isn’t. Our camera inspection tells the difference, and we’ll show you exactly what’s leaking before you spend a dollar. That’s what separates a real repair from a recurring one.
Trusted Brands We Service in Largo
We work with materials built for coastal air, not whatever is cheapest on the truck. For Largo chimneys, we lean on Copperfield chimney accessories for caps and chase covers, Gelco flashing and termination products, and Famco components for gas venting and anchor plates. These are brands working chimney pros actually rely on, and we keep common sizes in stock for faster turnaround on Largo jobs. If your existing cap or flashing is a galvanized off-brand that rusted out early, we’ll replace it with stainless or coated components that hold up to salt air, and we’ll warranty the work in writing.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Largo Homes
- Rusted-out galvanized caps. In Largo’s salt air, galvanized chimney caps corrode within five to seven years, leaving flues open to squirrels, birds, and rain. We replace them with stainless steel caps sized to your flue, and we include a pest screen by default.
- Cracked chimney crowns and spalling brick. Hairline cracks from humidity and summer thunderstorms let water seep into the masonry, which then pops the brick face off. Mortar repointing and crown sealing in Largo typically run $600 to $1,400 depending on the damage area.
- Flashing leaks on prefab metal flues. Newer Largo construction often uses prefabricated metal chimneys, and the junction where they meet the roofline is a leak magnet. Rust at that seam stains ceilings and rots decking; we fix it before it spreads.
- Nesting pests in unused flues. Mild winters mean many Largo chimneys sit unused for months, and squirrels and birds take full advantage. A nest isn’t just a blockage; it’s a fire hazard and an air-quality problem. We remove it, show you the photo, and cap the flue so it doesn’t happen again.
Pricing for Chimney Repair in Largo, FL
We give you real numbers because Largo homeowners deserve to know what a repair should cost before they book. A typical mortar repointing job runs $600 to $1,400. Spalling brick repair runs $800 to $2,500 depending on how many bricks need replacement. Chimney waterproofing runs $400 to $900. Flashing repair runs $450 to $900 for minor work and $1,200 to $2,000 for full replacement. Liner installation runs $1,800 to $3,400. Full chimney rebuilding, which is rare but sometimes needed on Largo’s oldest homes, runs $4,000 to $10,000. Every quote is written, itemized, and locked before we start. Call (850) 790-3475 for a free estimate, and we’ll match the work to what your chimney actually needs, not what the truck happens to carry.
We Also Serve Cities Near Largo
Our crews cover the full Largo area, including Clearwater, Seminole, Safety Harbor, and Palm Harbor. If you’re on the edge of town or just outside the city limits, we still carry the same written-price guarantee, the same photo documentation, and the same tracked arrival window. Our Chimney Repair team works throughout Pinellas County with the same standard on every job.
Serving Largo, FL - Our Local Coverage Area
We’re based in the Largo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Largo
Every two years, even if you never light a fire. In Largo, the danger isn’t creosote from wood burning; it’s salt-air corrosion, nesting pests, and water intrusion, all of which progress silently in unused flues. A gas-vent-only chimney can develop a cracked liner or a rusted cap that lets carbon monoxide backdraft, and you won’t smell it. Our camera inspection takes about an hour and gives you a photo record of exactly what’s going on. Call (850) 790-3475 to schedule one; the inspection is free with any repair.
Salt air and high humidity strip the zinc coating on galvanized steel within five to seven years, which is why we see so many rusted caps on Largo roofs while the same cap might last fifteen years inland. Once the galvanizing goes, the steel underneath rusts through quickly, leaving an open flue. We replace galvanized caps with stainless steel, which holds up far better against Gulf air, and we include the pest screen so squirrels don’t move in the day after we leave.
Yes, but only if the actual leak source is identified, and that’s usually flashing, a cracked crown, or damaged masonry. We camera-inspect the whole system, not just the spot where the stain appears, because water travels. A ceiling stain near the fireplace in Largo often traces back to flashing rusted at the roof line. We’ll show you the leak, explain the fix, and give you a written price before any work starts.
The crown, almost always. Largo’s humidity and storm cycles open hairline cracks in the concrete crown, water gets in, and the freeze-thaw damage that northerners deal with is replaced here by salt crystallization and spalling. The cap fails next. We inspect the crown on every Largo repair call because a cracked crown is the root cause behind most of the spalling brick and water intrusion we see.
If your gas water heater or furnace vents through an unlined or damaged masonry flue, yes, you likely need one, and Largo’s humid climate accelerates the damage that makes liners necessary. An improperly vented gas appliance can release carbon monoxide into your living space, and that’s not a risk worth taking. We install stainless and DuraFlex liners sized to your appliance’s BTU rating, and every installation includes a written guarantee and a free second visit if anything fails within 365 days. Call (850) 790-3475 for an exact quote; estimates are free.
Written by Cory Mitchell, Owner at Hadley Chimney Tampa, serving Largo and the surrounding Pinellas County communities since 2003.